dmesg - Linux 5.16.9
usb usb3: Manufacturer: Linux 5.16.9k8small ohci_hcd
usb usb3: SerialNumber: 0000:00:16.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usb-storage
usbcore: registered new device driver apple-mfi-fastcharge
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2022-02-11T18:36:59 UTC (1644604619)
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
IR NEC protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR Sharp protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR XMP protocol handler initialized
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered PF_LLC protocol family
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
u32 classifier
Performance counters on
input device check on
Actions configured
gre: GRE over IPv4 demultiplexor driver
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
NET: Registered PF_KEY protocol family
8021q: 802.1Q VLAN Support v1.8
x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (5923389864, 5982782)->(5933629499, -4256853)
Loading compiled-in X.509 certificates
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
ALSA device list:
No soundcards found.
TAP version 14
1..0
Freeing unused kernel image (initmem) memory: 1192K
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Write protecting the kernel read-only data: 24576k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 1192K
rodata_test: all tests were successful
Run /init as init process
with arguments:
/init
auto
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=Linux-amd64-n
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ahci 0000:00:11.0: version 3.0
e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci-pci: EHCI PCI platform driver
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
scsi host0: ahci
usb 1-1: new full-speed USB device number 2 using ohci-pci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a180 irq 26
ata3: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a200 irq 26
ata4: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a280 irq 26
ata5: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a300 irq 26
ata6: SATA max UDMA/133 abar m2048@0xfeb4a000 port 0xfeb4a380 irq 26
usb 2-1: new low-speed USB device number 2 using ohci-pci
e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 6c:b3:11:0f:c2:4a
e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: E42641-005
e1000e 0000:01:00.0 enp1s0: renamed from eth0
usb 1-1: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Optical Mouse
usb 2-1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/0003:093A:2510.0001/input/input3
hid-generic 0003:093A:2510.0001: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.0-1/input0
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-4: new full-speed USB device number 3 using ohci-pci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-11: WDC WDS500G2B0A, X61190WD, max UDMA/133
ata6.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata1.00: ATAPI: ASUS BW-16D1HT, 3.03, max UDMA/133
ata2.00: Features: Dev-Sleep
ata6.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: CD-ROM ASUS BW-16D1HT 3.03 PQ: 0 ANSI: 5
ata2.00: configured for UDMA/133
usb 1-4: New USB device found, idVendor=058f, idProduct=9360, bcdDevice= 1.00
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: USB Reader
usb 1-4: Manufacturer:
usb 1-4: SerialNumber: 2004888
usb-storage 1-4:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-4:1.0
scsi 1:0:0:0: Direct-Access ATA WDC WDS500G2B0A 90WD PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA TOSHIBA DT01ACA1 A750 PQ: 0 ANSI: 5
scsi 5:0:0:0: will avoid using SCT for temperature monitoring
sda: sda1 sda2
sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdb] 4096-byte physical blocks
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-5: new full-speed USB device number 4 using ohci-pci
sdb: sdb1 sdb2 sdb3 sdb4
sd 5:0:0:0: [sdb] Attached SCSI disk
sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
random: fast init done
usb 1-5: New USB device found, idVendor=0458, idProduct=7061, bcdDevice=10.06
usb 1-5: New USB device strings: Mfr=16, Product=96, SerialNumber=0
usb 1-5: Product: iLook 1321 V2
usb 1-5: Manufacturer: iLook 1321 V2
usb 1-1: USB disconnect, device number 2
usb 1-4: USB disconnect, device number 3
usb 1-5: USB disconnect, device number 4
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb48000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 5.16.9k8small ehci_hcd
usb usb4: SerialNumber: 0000:00:12.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
usbcore: registered new interface driver uas
xhci_hcd 0000:03:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000090
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.16.9k8small xhci-hcd
usb usb5: SerialNumber: 0000:03:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
usb 2-1: USB disconnect, device number 2
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.16.9k8small xhci-hcd
usb usb6: SerialNumber: 0000:03:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb46000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 5.16.9k8small ehci_hcd
usb usb7: SerialNumber: 0000:00:13.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb44000
usb 4-1: new high-speed USB device number 2 using ehci-pci
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 5.16.9k8small ehci_hcd
usb usb8: SerialNumber: 0000:00:16.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 5-2: new high-speed USB device number 2 using xhci_hcd
usb 4-1: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02
usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-1: Product: USB2.0 Hub
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
usb 5-2: config 1 interface 0 altsetting 0 endpoint 0x83 has an invalid bInterval 32, changing to 9
usb 5-2: New USB device found, idVendor=1b3f, idProduct=2247, bcdDevice= 1.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 5-2: Product: GENERAL WEBCAM
usb 5-2: Manufacturer: GENERAL
usb 5-2: SerialNumber: JH0319_20200710_v012
usb 2-1: new low-speed USB device number 3 using ohci-pci
usb 2-1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Optical Mouse
usb 2-1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/0003:093A:2510.0002/input/input4
hid-generic 0003:093A:2510.0002: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.0-1/input0
usb 1-4: new full-speed USB device number 5 using ohci-pci
usb 1-4: New USB device found, idVendor=058f, idProduct=9360, bcdDevice= 1.00
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: USB Reader
usb 1-4: Manufacturer:
usb 1-4: SerialNumber: 2004888
usb-storage 1-4:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-4:1.0
usb 4-5: new high-speed USB device number 4 using ehci-pci
usb 4-5: New USB device found, idVendor=0458, idProduct=7061, bcdDevice=10.06
usb 4-5: New USB device strings: Mfr=16, Product=96, SerialNumber=0
usb 4-5: Product: iLook 1321 V2
usb 4-5: Manufacturer: iLook 1321 V2
raid6: sse2x4 gen() 9121 MB/s
raid6: sse2x4 xor() 3719 MB/s
raid6: sse2x2 gen() 8195 MB/s
raid6: sse2x2 xor() 6675 MB/s
raid6: sse2x1 gen() 6312 MB/s
raid6: sse2x1 xor() 4803 MB/s
raid6: using algorithm sse2x4 gen() 9121 MB/s
raid6: .... xor() 3719 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
async_tx: api initialized (async)
xor: automatically using best checksumming function avx
scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdc] Media removed, stopped polling
scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
sd 6:0:0:0: [sdc] Attached SCSI removable disk
scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 6:0:0:1: [sdd] Media removed, stopped polling
sd 6:0:0:2: [sde] Media removed, stopped polling
sd 6:0:0:2: [sde] Attached SCSI removable disk
scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 6:0:0:1: [sdd] Attached SCSI removable disk
sd 6:0:0:3: [sdf] Media removed, stopped polling
sd 6:0:0:3: [sdf] Attached SCSI removable disk
systemd[1]: systemd 250.3-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to .
systemd[1]: Queued start job for default target Graphical Interface.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/systemd-fsck.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
systemd[1]: Starting Wait for network to be configured by ifupdown...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root).
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
fuse: init (API version 7.35)
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr. Quota mode: none.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Journal Service.
systemd-journald[1083]: Received client request to flush runtime journal.
ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.VGA.LCD._BCM.AFN7], AE_NOT_FOUND (20210930/psargs-330)
ACPI Error: Aborting method \_SB.PCI0.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20210930/psparse-529)
ACPI: \_SB_.PCI0.VGA_.LCD_: _BCM evaluation failed
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:1: Attached scsi generic sg4 type 0
sd 6:0:0:2: Attached scsi generic sg5 type 0
sd 6:0:0:3: Attached scsi generic sg6 type 0
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[drm] radeon kernel modesetting enabled.
radeon 0000:00:01.0: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (ARUBA 0x1002:0x9901 0x1043:0x8526 0x00).
ATOM BIOS: 113
radeon 0000:00:01.0: VRAM: 768M 0x0000000000000000 - 0x000000002FFFFFFF (768M used)
radeon 0000:00:01.0: GTT: 1024M 0x0000000030000000 - 0x000000006FFFFFFF
[drm] Detected VRAM RAM=768M, BAR=256M
[drm] RAM width 64bits DDR
[drm] radeon: 768M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading ARUBA Microcode
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[drm] Internal thermal controller without fan control
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[drm] radeon: dpm initialized
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 262144, num gpu pages 262144
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
usb 5-2: Warning! Unlikely big volume range (=5120), cval->res is probably wrong.
usb 5-2: [5] FU [Mic Capture Volume] ch = 1, val = 7680/12800/1
usb 4-5: failed to read current rate; disabling the check
[drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000030000c00
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
usb 5-2: Found UVC 1.00 device GENERAL WEBCAM (1b3f:2247)
usb 5-2: Failed to query (GET_INFO) UVC control 2 on unit 1: -32 (exp. 1).
usb 5-2: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
input: GENERAL WEBCAM: GENERAL WEBCAM as /devices/pci0000:00/0000:00:15.0/0000:03:00.0/usb5/5-2/5-2:1.0/input/input11
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000030000c18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000030000c1c
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000030000c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000030000c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000030000c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000030000c10
radeon 0000:00:01.0: radeon: MSI limited to 32-bit
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
Adding 71679996k swap on /dev/sda2. Priority:-2 extents:1 across:71679996k SS
usbcore: registered new interface driver snd-usb-audio
usb 4-5: Found UVC 1.00 device iLook 1321 V2 (0458:7061)
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
input: iLook 1321 V2: iLook 1321 V2 as /devices/pci0000:00/0000:00:12.2/usb4/4-5/4-5:1.0/input/input12
usbcore: registered new interface driver uvcvideo
[drm] ring test on 6 succeeded in 17 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: errors=remount-ro,user_xattr. Quota mode: none.
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY2
[drm] CRT1: NUTMEG
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
serial 0000:02:05.0: LSR safety check engaged!
serial 0000:02:05.0: LSR safety check engaged!
serial 0000:02:05.1: LSR safety check engaged!
serial 0000:02:05.1: LSR safety check engaged!
[drm] fb mappable at 0xE03E9000
[drm] vram apper at 0xE0000000
[drm] size 7299072
[drm] fb depth is 24
[drm] pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[drm] amdgpu kernel modesetting enabled.
amdgpu: CRAT table disabled by module option
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
8021q: adding VLAN 0 to HW filter on device enp1s0
e1000e 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
usb 5-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
usb 5-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
usb 5-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
usb 5-2: Failed to query (GET_DEF) UVC control 2 on unit 1: -32 (exp. 1).
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP socket layer initialized
xhci_hcd 0000:03:00.0: WARN Successful completion on short TX for slot 1 ep 10: needs XHCI_TRUST_TX_LENGTH quirk?
xhci_hcd 0000:03:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 10 comp_code 1
xhci_hcd 0000:03:00.0: Looking for event-dma 0000000103050580 trb-start 0000000103050590 trb-end 0000000103050590 seg-start 0000000103050000 seg-end 0000000103050ff0
xhci_hcd 0000:03:00.0: WARN Successful completion on short TX for slot 1 ep 10: needs XHCI_TRUST_TX_LENGTH quirk?
e1000e 0000:01:00.0 enp1s0: NIC Link is Down
e1000e 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None